[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/tools/checkObjFilePath.pl b/mcu/tools/checkObjFilePath.pl
new file mode 100644
index 0000000..6441c89
--- /dev/null
+++ b/mcu/tools/checkObjFilePath.pl
@@ -0,0 +1,149 @@
+#!/usr/bin/perl
+#
+# Copyright Statement:
+# --------------------
+# This software is protected by Copyright and the information contained
+# herein is confidential. The software may not be copied and the information
+# contained herein may not be used or disclosed except with the written
+# permission of MediaTek Inc. (C) 2008
+#
+# BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+# THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+# RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+# AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+# NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+# SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+# SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+# THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+# NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+# SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+#
+# BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+# LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+# AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+# OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+# MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+#
+# THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+# WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+# LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+# RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+# THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+#
+#
+#!/usr/bin/perl
+# Copy files listed in make\$module\$module.lis to the $TARGET.
+
+# show usage
+
+use File::Basename;
+
+sub usage
+{
+ print "USAGE: perl checkObjFilePath.pl <filename of .lis>\n";
+ exit(0);
+}
+
+my $LIS_FILE;
+
+$ORIGINAL = $ARGV[0];
+$TARGET = $ARGV[1];
+$LIS_FILE = $ARGV[2];
+
+$BASE = $ARGV[3];
+open BASE,"$BASE" or die "0 Cannot open $BASE\n";
+while(<BASE>) {
+ chomp($_);
+ $base_dir=uc($_);
+ $${base_dir}=1;
+}
+close BASE;
+
+my @SRCModList = (defined $ARGV[4])? split(' ',$ARGV[4]) : ();
+foreach $src(@SRCModList) {
+ $${src} = 1;
+}
+
+my @PSRCModList = (defined $ARGV[5])? split(' ',$ARGV[5]) : ();
+foreach $psrc(@PSRCModList) {
+ $${psrc} = 1;
+}
+
+$GLOBAL_USE = 1;
+
+$EXCLUDE_FILE = $ARGV[6];
+open EXCLUDE_FILE,"$EXCLUDE_FILE" or die "1 Cannot open $EXCLUDE_FILE\n";
+while(<EXCLUDE_FILE>) {
+ chomp($_);
+ $_ =~ /(.+) (.+)/;
+ $ex_file=uc($2);
+ $${ex_file}=$1;
+}
+close EXCLUDE_FILE;
+
+$RELEASE_PACKAGE = $ARGV[7];
+
+if ($RELEASE_PACKAGE =~ /INET_MMI/i) {
+ $INET_MMI = 1;
+ $MMI = 1;
+} elsif ($RELEASE_PACKAGE =~ /MMI/i) {
+ $MMI = 1;
+} elsif ($RELEASE_PACKAGE =~ /INET_L4/i) {
+ $INET_L4 = 1;
+ $L4 = 1;
+} elsif ($RELEASE_PACKAGE =~ /L4/i) {
+ $L4 = 1;
+} elsif ($RELEASE_PACKAGE =~ /INET_PROTOCOL/i) {
+ $INET_PROTOCOL = 1;
+ $PROTOCOL = 1;
+} elsif ($RELEASE_PACKAGE =~ /PROTOCOL/i) {
+ $PROTOCOL = 1;
+ print "RELEASE_PACKAGE=$RELEASE_PACKAGE $PROTOCOL\n";
+} else {
+ $OBJ = 1;
+}
+
+open LIS_FILE,"$LIS_FILE" or die "2 Cannot open $LIS_FILE\n";
+
+$backup = $/; undef $/;
+$reading = <LIS_FILE>;
+$/ = $backup;
+close LIS_FILE;
+
+@FILE = split(" ",$reading);
+system("perl pcore\\tools\\time.pl -n");
+foreach (@FILE) {
+ $LIS= $_;
+ open LIS,"$_" or die "2 Cannot open $_\n";
+ while (<LIS>) {
+ chomp($_);
+ $file = uc($_);
+ $file_dir = uc(dirname($file));
+# if (($${file_dir} == 1) && ($$${file} != 1) && ($file =~ /\.(c|cpp|s)$/i)) {
+# system("echo Error: The object-release $file in $LIS is under the must-be-released folder: $file_dir.>>custom_release_err.log");
+# print "Error: The object-release $file in $LIS is under the must-be-released folder: $file_dir.\n";
+# exit 1;
+# }
+# while ($file_dir =~ /\\/) {
+# $file_dir = uc(dirname($file_dir));
+# if (($${file_dir} == 1) && ($$${file} != 1) && ($file =~ /\.(c|cpp|s)$/i)) {
+# system("echo Error: The object-release $file in $LIS is under the must-be-released folder: $file_dir.>>custom_release_err.log");
+# print "Error: The object-release $file in $LIS is under the must-be-released folder: $file_dir.\n";
+# exit 1;
+# }
+# }
+ if (-e "$TARGET\\$file") {
+ if (($file =~ /\.(c|cpp|s)$/i) && ($$${file} != 1)) {
+ system("echo Error: The object-release $file in $LIS is released to $TARGET\\$file.>>custom_release_err.log");
+ print "Error: The object-release $file in $LIS is released to $TARGET\\$file.\n";
+ exit 1;
+ }
+ }
+ }
+ close LIS;
+}
+system("perl pcore\\tools\\time.pl -n");
+
+