[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/tools/cp_dsp_files.pl b/mcu/tools/cp_dsp_files.pl
new file mode 100644
index 0000000..6fca8b1
--- /dev/null
+++ b/mcu/tools/cp_dsp_files.pl
@@ -0,0 +1,192 @@
+#!/usr/bin/perl
+#
+# Copyright Statement:
+# --------------------
+# This software is protected by Copyright and the information contained
+# herein is confidential. The software may not be copied and the information
+# contained herein may not be used or disclosed except with the written
+# permission of MediaTek Inc. (C) 2012
+#
+# BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+# THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+# RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+# AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+# NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+# SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+# SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+# THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+# NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+# SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+#
+# BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+# LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+# AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+# OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+# MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+#
+# THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+# WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+# LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+# RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+# THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+#
+#*****************************************************************************
+#*
+#* Filename:
+#* ---------
+#* cp_dsp_files.pl
+#*
+#* Project:
+#* --------
+#*
+#*
+#* Description:
+#* ------------
+#* This script is to copy dsp files and append the DSP label info.
+##*
+#* Author:
+#* -------
+#* Ray Lin-Wang (mtk04222)
+#*
+#****************************************************************************/
+#****************************************************************************
+# Included Modules
+#****************************************************************************
+use strict;
+use File::Copy;
+use File::Path;
+use File::Basename;
+use Cwd;
+
+#****************************************************************************
+# Input Parameters & Global Variables
+#****************************************************************************
+(($#ARGV <0) || ($#ARGV > 6)) && &Usage;
+my $dsp_dir = $ARGV[0]; # The DSP folder ex:modem/dsp_bin
+my $build_dsp_dir = $ARGV[1]; # The DSP files will copy to this folder ex: build/$project/$flavor/bin/dsp
+my $target_dir = $ARGV[2]; # The DSP bin will copy to this folder ex: build/$project/$flavor/bin/
+my $project_mk = $ARGV[3]; # The project makefile path. ex: make/pcore/XXXX.mak
+my $dsp_version = $ARGV[4]; # The DSP label info.
+my $need_cp_sig = $ARGV[5]; # Copy signature file accodring to PARTIAL_SOURCE
+my $info_out_file = $ARGV[6]; # output the DSP info to this file for cmmgen
+$target_dir = dirname($target_dir) if(!-d $target_dir);
+
+my $OStype = 'WIN';
+if($^O ne "MSWin32"){
+ $OStype = 'LINUX';
+}
+my $dsp_project ="";
+my $dsp_flavor = "";
+my $dsp_file = "";
+my $nand_flash_support = "";
+my $category ="";
+#****************************************************************************
+# Read from project makefile
+#****************************************************************************
+my %feature;
+open(FILE_HANDLE, "<$project_mk") or &error_handler("Fail to read $project_mk!", __FILE__, __LINE__);
+while (<FILE_HANDLE>)
+{
+ if (/^(\w+)\s*=\s*(\S+)/)
+ {
+ my $keyname = $1;
+ defined($feature{$keyname}) && warn "$1 redefined in $project_mk!\n";
+ $feature{$keyname} = $2;
+ }
+}
+close FILE_HANDLE;
+
+#****************************************************************************
+# Setting DSP files
+#****************************************************************************
+# read dsp_project
+if (defined($feature{'DSP_PROJECT'}) && $feature{'DSP_PROJECT'} ne "") {
+ $dsp_project = $feature{'DSP_PROJECT'};
+}
+else {
+ &error_handler("Fail to get the DSP_PROJECT value from $project_mk!", __FILE__, __LINE__);
+}
+
+#read dsp_flavor
+if (defined($feature{'DSP_FLAVOR'}) && $feature{'DSP_FLAVOR'} ne "") {
+ $dsp_flavor = $feature{'DSP_FLAVOR'};
+}
+else {
+ &error_handler("Fail to get the DSP_FLAVOR value from $project_mk!", __FILE__, __LINE__);
+}
+
+#read nand_support
+if (defined($feature{'NAND_SUPPORT'}) && $feature{'NAND_SUPPORT'} ne "") {
+ $nand_flash_support = $feature{'NAND_SUPPORT'};
+}
+else {
+ &error_handler("Fail to get the NAND_SUPPORT value from $project_mk!", __FILE__, __LINE__);
+}
+if ($nand_flash_support eq "TRUE") {
+ $category = "NAND";
+} else {
+ $category = "SPI";
+}
+
+#****************************************************************************
+# Execute
+#****************************************************************************
+my $pattern = "DSP";
+my @delfiles = glob "$target_dir/${pattern}*.bin";
+unlink(@delfiles) if (@delfiles);
+
+#my $dsp_bin_file = "${dsp_dir}/${dsp_project}/${dsp_flavor}/${category}/${dsp_project}_${dsp_flavor}_${category}.bin";
+my $dsp_bin_file = "${dsp_dir}/$dsp_project/$dsp_flavor/final_bin/dsp.bin";
+my ($name, $path, $suffix) = fileparse($dsp_bin_file,qr/\.+?.*/);
+my $dsp_dst_file = "$target_dir/DSP_${dsp_version}${suffix}";
+my @dsp_dbg_file = glob "${dsp_dir}/$dsp_project/$dsp_flavor/final_bin/DbgInfo_DSP_*";
+&error_handler("There're more than one DbgInfo_DSP_* files under folder: ${dsp_dir}/$dsp_project/$dsp_flavor/final_bin, please remove the old DbgInfo_DSP_* file\n") if $#dsp_dbg_file ne 0;
+#if ($dsp_version !~ /DSP/) {
+# &error_handler("Cannot find the \"DSP\" pattern in the DSP version \"$dsp_version\", it may cause download fail.", __FILE__, __LINE__);
+#}
+copy($dsp_bin_file,"$dsp_dst_file") or &error_handler("copy $dsp_bin_file to $dsp_dst_file $!", __FILE__, __LINE__);
+
+my @del_dsp_dbg_files = glob "$target_dir/DbgInfo_DSP_*";
+unlink(@del_dsp_dbg_files) if (@del_dsp_dbg_files);
+if (-e $dsp_dbg_file[0]){
+ copy("$dsp_dbg_file[0]","$target_dir") or &error_handler("copy $dsp_dbg_file[0] to $target_dir $!", __FILE__, __LINE__);
+}
+
+if ($need_cp_sig eq "TRUE" && -e "$dsp_bin_file.sig") {
+ copy("$dsp_bin_file.sig","$dsp_dst_file.sig") or &error_handler("copy $dsp_bin_file.sig to $dsp_dst_file.sig $!", __FILE__, __LINE__);
+}
+
+# write the DSP file to cp_dsp_info.tmp for cmmgen
+open(FH,">$info_out_file") or &error_handler("Cannot open $info_out_file!", __FILE__, __LINE__);
+print FH "DSPMOLY_BIN = $dsp_dst_file\n";
+close(FH);
+
+#****************************************************************************
+# subroutine: Usage
+#****************************************************************************
+sub Usage
+{
+ warn <<"_END_OF_USAGE";
+Usage:
+ perl cp_dsp_files.pl dsp_folder build_dsp_folder bin_folder platform label
+Example:
+ perl pcore/tools/cp_dsp_files.pl ./pcore/modem/dsp_bin ./build/project/flavor/bin/dsp ./build/project/flavor/bin MTXXXX XX_XX_W1X_1X
+
+_END_OF_USAGE
+ exit 1;
+}
+
+#****************************************************************************
+# subroutine: error_handler
+# input: $error_msg: error message
+#****************************************************************************
+sub error_handler
+{
+ my ($error_msg, $file, $line_no) = @_;
+
+ my $final_error_msg = "COPY_DSP_FILES ERROR: $error_msg at $file line $line_no\n";
+ print $final_error_msg;
+ die $final_error_msg;
+}