[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/tools/gps_config2.pl b/mcu/tools/gps_config2.pl
new file mode 100644
index 0000000..fd596e5
--- /dev/null
+++ b/mcu/tools/gps_config2.pl
@@ -0,0 +1,140 @@
+#!/usr/bin/perl
+#
+# Copyright Statement:
+# --------------------
+# This software is protected by Copyright and the information contained
+# herein is confidential. The software may not be copied and the information
+# contained herein may not be used or disclosed except with the written
+# permission of MediaTek Inc. (C) 2005
+#
+# BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+# THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+# RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+# AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+# NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+# SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+# SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+# THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+# NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+# SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+#
+# BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+# LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+# AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+# OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+# MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+#
+# THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+# WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+# LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+# RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+# THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+#
+#
+#*****************************************************************************
+#*
+#* Filename:
+#* ---------
+#* gps_config2.pl
+#*
+#* Project:
+#* --------
+#* Maui_Software
+#*
+#* Description:
+#* ------------
+#*
+#*------------------------------------------------------------------------------
+#* Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+#*============================================================================
+#****************************************************************************/
+
+#****************************************************************************
+# parsing command arguments
+#****************************************************************************
+
+#$file2="custom\\drv\\misc_drv\\EVEN6228_DEMO_BB\\codegen\\gpio_var.c"; # Need Modify: Input from @ mcu\custom\drv\misc_drv\EVEN6228_DEMO_BB\codegen\gpio_var.c
+#$gps_ini="build\\EVEN6228_DEMO\\EVEN6228_DEMO_PCB04_gprs_MT6228_S02.MAUI_W07_40.bin\\GPS\\gps.ini"; # Need Modify: Output to @ mcu\build\$EVEN6228_DEMO_BB\$NFB\GPS\gps.ini
+
+$file2=$ARGV[0];
+$gps_ini=$ARGV[1];
+
+@gps_gpio=("gpio_gps_power_pin",
+ "gpio_gps_reset_pin",
+ "gpio_gps_standby_pin",
+ "gpio_gps_32k_pin");
+
+open(GPS_CONFIG, $file2) or die "$file2 cannot be opened!\r\n";
+
+print "Open $file2!\r\n\r\n";
+
+sub GetDefineValue {
+ my ($line) = $_[0];
+ my ($pattern) = $_[1];
+ my ($ret) = 0;
+ my ($value) = 0;
+ my (@result);
+
+ if($line =~ /^*$pattern/i){
+# print $line;
+# print "~~~~~~~~~~~~~>\r\n";
+
+ @tokens=split(/\s+/,$line);
+
+ if($tokens[4] =~ /(GPIO|GPO)/){
+ ($token1,$token2)=split(/;/,$tokens[4]); # e.g, $tokens[4] =GPIO_PORT_1;
+ ($gpio_type,$port,$pin)=split(/_/,$token1); # e.g, $token1 =GPIO_PORT_1
+
+ if( $gpio_type =~ /GPIO/i ){
+ $ret = 1;
+ $value = $pin;
+ }
+ elsif( $gpio_type =~ /GPO/i ){
+ $ret = 1;
+ $value = $pin+100;
+ }
+ else {
+ print "Unknow GPIO Type: $gps_type !\r\n";
+ }
+ }
+ else{
+ print "Cannot find $pattern !\r\n";
+ }
+
+# print "<~~~~~~~~~~~~~\r\n";
+ }
+
+ @result = ($ret, $value);
+ return @result;
+
+}
+
+open(GPS_INI, ">$gps_ini") or die "$gps_ini cannot be opened!";
+print GPS_INI "[GPIO]\r\n";
+close ($gps_ini);
+
+while($line = <GPS_CONFIG>) {
+
+ foreach $pattern (@gps_gpio){
+# $pattern = $gps_power_pin;
+ ($g_ret, $g_value) = GetDefineValue($line, $pattern);
+ if($g_ret){
+ $output="$pattern=$g_value\r\n";
+
+ open(GPS_INI, ">>$gps_ini") or die "$gps_ini cannot be opened!";
+ print GPS_INI $output;
+ close ($gps_ini);
+
+ print $output;
+ break;
+ }
+ }
+
+}
+
+
+close ($file2);
+exit 0;
+