| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2010 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| |
| /***************************************************************************** |
| * |
| * Filename: |
| * --------- |
| * dcl_idc.h |
| * |
| * Project: |
| * -------- |
| * MOLY_Software |
| * |
| * Description: |
| * ------------ |
| * Header file of DCL (Driver Common Layer) for IDC. |
| * |
| * Author: |
| * ------- |
| * |
| * Ansel Liao |
| * |
| *============================================================================ |
| * HISTORY |
| * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *------------------------------------------------------------------------------ |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| *------------------------------------------------------------------------------ |
| * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *============================================================================ |
| ****************************************************************************/ |
| |
| #ifdef DCL_DEFINITION_STRUCT |
| #ifndef __DCL_IDC_H_STRUCT__ |
| #define __DCL_IDC_H_STRUCT__ |
| |
| #include "kal_general_types.h" |
| |
| #define MAX_NUM_BYTE 9 |
| #ifdef ATEST_DRV_ENABLE |
| #define MAX_NUM_EVENT 16 |
| #else /*ATEST_DRV_ENABLE*/ |
| #define MAX_NUM_EVENT 1 |
| #endif |
| |
| |
| #if defined(__MD93__) |
| typedef void (*IDC_DRV_TO_EL1_CALLBACK)(kal_bool data); |
| #elif defined(__MD95__) || defined(__MD97__) || defined(__MD97P__) |
| typedef void (*IDC_DRV_TO_EL1_CALLBACK)(void *data); |
| #endif |
| |
| |
| /******************************************************************************* |
| * DCL_OPTIONS for IDC |
| *******************************************************************************/ |
| #define IDC_OPTIONS |
| |
| |
| /******************************************************************************* |
| * DCL_CONFIGURE_T for IDC |
| *******************************************************************************/ |
| #define IDC_CONFIGS |
| |
| |
| /******************************************************************************* |
| * DCL_EVENT for IDC |
| *******************************************************************************/ |
| #define IDC_EVENTS |
| |
| |
| /******************************************************************************* |
| * DCL_CTRL_CMD for IDC |
| *******************************************************************************/ |
| /* The IDC Command Values in DCL_CTRL_CMD_T Enum of dcl.h */ |
| #ifdef __BUILD_DOM__ |
| typedef enum { |
| IDC_CMD_SET_DCB_CONFIG, |
| IDC_CMD_GET_DCB_CONFIG, |
| IDC_CMD_SET_BAUDRATE, |
| IDC_CMD_GET_MAX_BAUDRATE, |
| IDC_CMD_SET_FIFO_TRIGGER, |
| IDC_CMD_SET_PM_CONFIG, |
| IDC_CMD_GET_PM_CONFIG, |
| IDC_CMD_SEND_EVENT, |
| IDC_CMD_SCHEDULE_EVENT, |
| IDC_CMD_SCHEDULE_GPS_BLANK_EVENT, |
| IDC_CMD_SCHEDULE_GPS_L1_L5_BLANK_EVENT, |
| IDC_CMD_SCHEDULE_UPDATE, |
| IDC_CMD_PURGE, |
| IDC_CMD_CHECK_EVENT_SEND_OUT, |
| IDC_CMD_SET_PIN_CONFIG, |
| IDC_CMD_GET_PIN_CONFIG, |
| IDC_CMD_REGISTER_PM_CALLBACK, |
| IDC_CMD_UNREGISTER_PM_CALLBACK, |
| IDC_CMD_SET_NEW_PM_CONFIG, |
| IDC_CMD_GET_NEW_PM_CONFIG, |
| IDC_CMD_STOP_EVENT, |
| IDC_CMD_GET_SCHEDULE_STATUS, |
| IDC_CMD_GET_SCHEDULE_STATUS_2, |
| IDC_CMD_FORCE_ON_RF, |
| IDC_CMD_REMAPPING_CONFIG, |
| IDC_CMD_AUTO_TX_CONFIG, |
| IDC_CMD_AUTO_TX_EN, |
| IDC_CMD_SCHEDULE_UPDATE_N_RETRUN_RFTX, |
| IDC_CMD_SCHEDULE_EVENT_LTE_NR, |
| IDC_CMD_ENABLE_RAT, |
| IDC_CMD_DISABLE_RAT, |
| IDC_CMD_SLEEP_NOTIFY, |
| IDC_CMD_WAKE_NOTIFY, |
| IDC_CMD_SET_ILM, |
| IDC_CMD_GPS_B13_B14, |
| } DCL_CTRL_CMD_T; |
| #else // __BUILD_DOM__ |
| #define IDC_CMDS \ |
| IDC_CMD_SET_DCB_CONFIG, \ |
| IDC_CMD_GET_DCB_CONFIG, \ |
| IDC_CMD_SET_BAUDRATE, \ |
| IDC_CMD_GET_MAX_BAUDRATE, \ |
| IDC_CMD_SET_FIFO_TRIGGER, \ |
| IDC_CMD_SET_PM_CONFIG, \ |
| IDC_CMD_GET_PM_CONFIG, \ |
| IDC_CMD_SEND_EVENT, \ |
| IDC_CMD_SCHEDULE_EVENT, \ |
| IDC_CMD_SCHEDULE_GPS_BLANK_EVENT, \ |
| IDC_CMD_SCHEDULE_GPS_L1_L5_BLANK_EVENT, \ |
| IDC_CMD_SCHEDULE_UPDATE, \ |
| IDC_CMD_PURGE, \ |
| IDC_CMD_CHECK_EVENT_SEND_OUT, \ |
| IDC_CMD_SET_PIN_CONFIG, \ |
| IDC_CMD_GET_PIN_CONFIG, \ |
| IDC_CMD_REGISTER_PM_CALLBACK, \ |
| IDC_CMD_UNREGISTER_PM_CALLBACK, \ |
| IDC_CMD_SET_NEW_PM_CONFIG, \ |
| IDC_CMD_GET_NEW_PM_CONFIG, \ |
| IDC_CMD_STOP_EVENT, \ |
| IDC_CMD_GET_SCHEDULE_STATUS, \ |
| IDC_CMD_GET_SCHEDULE_STATUS_2, \ |
| IDC_CMD_FORCE_ON_RF, \ |
| IDC_CMD_REMAPPING_CONFIG, \ |
| IDC_CMD_AUTO_TX_CONFIG, \ |
| IDC_CMD_AUTO_TX_EN, \ |
| IDC_CMD_SCHEDULE_UPDATE_N_RETRUN_RFTX, \ |
| IDC_CMD_SCHEDULE_EVENT_LTE_NR, \ |
| IDC_CMD_ENABLE_RAT, \ |
| IDC_CMD_DISABLE_RAT, \ |
| IDC_CMD_SLEEP_NOTIFY, \ |
| IDC_CMD_WAKE_NOTIFY, \ |
| IDC_CMD_SET_ILM, \ |
| IDC_CMD_GPS_B13_B14, |
| #endif // __BUILD_DOM__ |
| |
| |
| /******************************************************************************* |
| * DCL_CTRL_DATA_T: Define the Control data structure for each module's command |
| *******************************************************************************/ |
| // For DclIDC_Initialize |
| typedef enum |
| { |
| IDC_INIT, |
| IDC_REINIT, |
| IDC_UART_ACTIVATE, |
| } IDC_INIT_TYPE_T; |
| |
| // For IDC_CMD_SET_DCB_CONFIG command |
| // For IDC_CMD_GET_DCB_CONFIG command |
| typedef struct |
| { |
| kal_uint32 u4Baud; // baudrate |
| kal_uint8 u1DataBits; // UART_BITS_PER_CHAR_T |
| kal_uint8 u1StopBits; // UART_STOP_BITS_T |
| kal_uint8 u1Parity; // UART_PARTIY_T |
| } IDC_CTRL_DCB_CONFIG_T; |
| |
| // For IDC_CMD_SET_BAUDRATE command |
| // For IDC_CMD_GET_MAX_BAUDRATE command |
| typedef struct |
| { |
| kal_uint32 baudrate; // baudrate |
| } IDC_CTRL_BAUDRATE_T; |
| |
| // For IDC_CMD_SET_FIFO_TRIGGER command |
| typedef struct |
| { |
| kal_uint8 rx_threshold; // threshold of RX FIFO |
| } IDC_CTRL_SET_FIFO_TRIGGER_T; |
| |
| // For IDC_CMD_SET_PM_CONFIG command |
| // For IDC_CMD_GET_PM_CONFIG command |
| typedef struct |
| { |
| kal_uint8 pm_idx; // Pattern match index |
| kal_uint8 priority; // Priority |
| kal_uint8 priority_bit_en;// Priority bit enable |
| kal_uint8 pattern; // Pattern |
| kal_uint8 pattern_bit_en; // Pattern bit enable |
| } IDC_CTRL_PM_CONFIG_T; |
| |
| // For IDC_CMD_SET_NEW_PM_CONFIG command |
| // For IDC_CMD_GET_NEW_PM_CONFIG command |
| typedef struct |
| { |
| kal_uint8 pattern0; // Pattern 0 |
| kal_uint8 pattern1; // Pattern 1 |
| } IDC_CTRL_NEW_PM_CONFIG_T; |
| |
| // For IDC_REGISTER_PM_CALLBACK command |
| // For IDC_UNREGISTER_PM_CALLBACK command |
| typedef struct |
| { |
| kal_uint8 pm_idx; // Pattern match index , 0~3 : old PM, 4: new PM |
| IDC_DRV_TO_EL1_CALLBACK func_ptr; // Callback function |
| #if defined(__MD93__) |
| kal_bool private_data;// Private data |
| #elif defined(__MD95__) || defined(__MD97__) || defined(__MD97P__) |
| void *private_data;// old PM -> kal_bool, new PM -> kal_uint16 |
| #endif |
| } IDC_CTRL_PM_CALLBACK_T; |
| |
| |
| // For IDC_CMD_SCHEDULE_EVENT command |
| typedef struct |
| { |
| #if defined(__MD93__) |
| kal_uint8 data[2]; |
| #elif defined(__MD95__) || defined(__MD97__) || defined(__MD97P__) |
| kal_uint8 num; // number of byte in the event |
| kal_uint8 data[MAX_NUM_BYTE]; // 2~9 byte data per event |
| #endif |
| kal_uint32 offset; // 97: 1000 = 1 ms, can be set up to 10000 (= 10 ms) *** 95: 61440 = 1 ms, can be set up to 614400 (= 10 ms) |
| } IDC_EVENT_T; |
| |
| typedef struct |
| { |
| kal_uint8 cmd_type; |
| kal_uint8 cmd_sub_type; |
| kal_uint32 cmd_phytime; |
| kal_uint8 event_type; |
| } IDC_CTRL_DROP_CMD_T; |
| |
| typedef struct |
| { |
| IDC_EVENT_T schedule_event; // event columns |
| kal_bool sleep_mode; // Use KAL_TRUE to lock resource |
| kal_bool gps_mode; // Use KAL_TRUE to notify gps to blank |
| IDC_CTRL_DROP_CMD_T *drop_cmd; // drop_cmd structure for DRV_IDC fill in if drop behavior occurs |
| } IDC_CTRL_SCHEDULE_EVENT_T; |
| |
| typedef struct |
| { |
| kal_uint8 rat_status; // rat_lte = 0, rat_nr = 1 |
| kal_uint8 raw_data; // L1: bit[0], L5:bit[1], if value = 0x0 : gps_off, value = 0x1 : gps_on |
| kal_uint32 frc_time; //1000 = 1 ms, can be set up to 10000 (= 10 ms) |
| } IDC_CTRL_GPS_L1_L5_BLANK_EVENT_T; |
| |
| typedef struct |
| { |
| kal_uint8 rat_status; // rat_lte = 0, rat_nr = 1 |
| kal_bool gps_mode; // Using KAL_TRUE to ON GPS blank,KAL_FALSE to OFF GPS blank |
| kal_uint32 frc_time; //1000 = 1 ms, can be set up to 10000 (= 10 ms) |
| } IDC_CTRL_GPS_SINGLE_BLANK_EVENT_T; |
| |
| |
| // For IDC_CMD_SCHEDULE_UPDATE command |
| typedef struct |
| { |
| kal_uint32 phy_time_set; // According to sub frame boundary, range = 0 ~ 61440*n (n: last sub frame boundary, 61440 = 1ms) |
| } IDC_CTRL_SCHEDULE_UPDATE_T; |
| |
| // For IDC_CMD_STOP_EVENT command |
| typedef struct |
| { |
| kal_uint32 bitmap; // events need to be stopped |
| } IDC_CTRL_STOP_EVENT_T; |
| |
| // For IDC_CMD_PURGE |
| typedef struct |
| { |
| UART_buffer dir; |
| } IDC_CTRL_PURGE_T; |
| |
| // For IDC_CMD_GET_SCHEDULE_STATUS |
| typedef struct |
| { |
| kal_uint32 schedule_status; // (bitmap) |
| } IDC_CTRL_GET_SCHEDULE_STATUS_T; |
| |
| // For IDC_CMD_CHECK_EVENT_SEND_OUT |
| typedef struct |
| { |
| kal_bool send_out; // all events are sent out |
| } IDC_CTRL_CHECK_EVENT_SEND_OUT_T; |
| |
| // For IDC_CMD_SET_PIN_CONFIG |
| typedef enum |
| { |
| IDC_INTERNAL_PIN, |
| IDC_EXTERNAL_PIN, |
| } IDC_PIN_MODE_T; |
| |
| typedef struct |
| { |
| IDC_PIN_MODE_T pin_mode; |
| } IDC_CTRL_PIN_CONFIG_T; |
| |
| typedef struct |
| { |
| kal_uint8 rf_path; // 0: rf path 0, 1: rf path 1 |
| } IDC_CTRL_RF_PATH_T; |
| |
| typedef struct |
| { |
| kal_uint8 remapping_table; // remapping table config |
| kal_uint8 remapping_table_en; // remapping table enable |
| } IDC_CTRL_REMAPPING_CONFIG_T; |
| |
| typedef struct |
| { |
| kal_uint8 tx_susp_quota; // it count down when receive REVOKE IDC_CMD, usually set 30ms, 1ms per unit |
| kal_uint8 reset_quota; // it count down when start auto tx system, usually set 200ms, 1ms per unit |
| } IDC_AUTO_TX_CONFIG_T; |
| |
| typedef struct |
| { |
| kal_bool auto_tx_en; // KAL_TRUE : auto tx on, KAL_FALSE : auto tx off |
| } IDC_AUTO_TX_EN_T; |
| |
| // For IDC_CMD_SCHEDULE_UPDATE_N_RETRUN_RFTX command |
| typedef struct |
| { |
| kal_uint8 rat_status; // rat_lte = 0, rat_nr = 1 |
| |
| } IDC_RAT_T; |
| typedef struct |
| { |
| kal_bool ilm_mode; // 0 : ILM_DISABLE, 1 : ILM_ENABLE |
| |
| } IDC_ILM_T; |
| typedef struct |
| { |
| kal_uint8 rat_status; // rat_lte = 0, rat_nr = 1 |
| kal_uint16 raw_data; // rat_lte: bit[0:1], rat_nr:bit[2] |
| } IDC_GPS_B13_B14_T; |
| |
| typedef struct |
| { |
| kal_uint32 frc_time_set; // According to sub frame boundary, range = 0 ~ 1000*n (n: last sub frame boundary, 1000 = 1ms) |
| kal_uint8 rf_path_status; // returns RF status to MD_IDC |
| |
| } IDC_CTRL_SCHEDULE_UPDATE_N_RETRUN_RFTX_T; |
| |
| typedef struct |
| { |
| IDC_EVENT_T schedule_event; // event columns |
| kal_bool sleep_mode; // Use KAL_TRUE to lock resource |
| kal_uint8 event_type; // LTE/NR/Common |
| IDC_CTRL_DROP_CMD_T *drop_cmd; // drop_cmd structure for DRV_IDC fill in if drop behavior occurs |
| } IDC_CTRL_SCHEDULE_EVENT_LTE_NR_T; |
| |
| /* The IDC Command Parameter Data Structure for Each Command in DCL_CTRL_DATA_T Enum of dcl.h */ |
| #ifdef __BUILD_DOM__ |
| typedef union |
| { |
| IDC_CTRL_DCB_CONFIG_T r_idc_ctrl_dcb_config; // Data Structure for IDC_CMD_SET_DCB_CONFIG, IDC_CMD_GET_DCB_CONFIG |
| IDC_CTRL_BAUDRATE_T r_idc_ctrl_baudrate; // Data Structure for IDC_CMD_SET_BAUDRATE, IDC_CMD_GET_MAX_BAUDRATE |
| IDC_CTRL_SET_FIFO_TRIGGER_T r_idc_ctrl_set_fifo_trigger; // Data Structure for IDC_CMD_SET_FIFO_TRIGGER |
| IDC_CTRL_PM_CONFIG_T r_idc_ctrl_pm_config; // Data Structure for IDC_CMD_SET_PM_CONFIG, IDC_CMD_GET_PM_CONFIG |
| IDC_CTRL_NEW_PM_CONFIG_T r_idc_ctrl_new_pm_config; // Data Structure for IDC_CMD_SET_NEW_PM_CONFIG, IDC_CMD_GET_NEW_PM_CONFIG |
| IDC_CTRL_SCHEDULE_EVENT_T r_idc_ctrl_schedule_event; // Data Structure for IDC_CMD_SCHEDULE_EVENT |
| IDC_CTRL_GPS_SINGLE_BLANK_EVENT_T r_idc_ctrl_gps_single_blank_event; // Data Structure for IDC_CMD_GPS_SINGLE_BLANK_EVENT |
| IDC_CTRL_GPS_L1_L5_BLANK_EVENT_T r_idc_ctrl_gps_l1_l5_blank_event; // Data Structure for IDC_CMD_GPS_L1_L5_BLANK_EVENT |
| IDC_CTRL_SCHEDULE_UPDATE_T r_idc_ctrl_schedule_start; // Data Structure for IDC_CMD_SCHEDULE_EVENT |
| IDC_CTRL_STOP_EVENT_T r_idc_ctrl_stop_event; // Data Structure for IDC_CMD_STOP_EVENT |
| IDC_CTRL_PURGE_T r_idc_ctrl_purge; // Data Structure for IDC_CMD_PURGE |
| IDC_CTRL_GET_SCHEDULE_STATUS_T r_idc_ctrl_get_schedule_status; // Data Structure for IDC_CMD_GET_SCHEDULE_STATUS |
| IDC_CTRL_CHECK_EVENT_SEND_OUT_T r_idc_ctrl_check_event_send_out; // Data Structure for IDC_CMD_CHECK_EVENT_SEND_OUT |
| IDC_CTRL_PIN_CONFIG_T r_idc_ctrl_pin_config; // Data Structure for IDC_CTRL_PIN_CONFIG_T |
| IDC_CTRL_PM_CALLBACK_T r_idc_ctrl_pm_callback; |
| IDC_CTRL_RF_PATH_T r_idc_ctrl_rf_path; |
| IDC_CTRL_REMAPPING_CONFIG_T r_idc_ctrl_remapping_config; |
| IDC_AUTO_TX_CONFIG_T r_idc_ctrl_auto_tx_config; |
| IDC_AUTO_TX_EN_T r_idc_ctrl_auto_tx_en; |
| IDC_CTRL_SCHEDULE_UPDATE_N_RETRUN_RFTX_T r_idc_ctrl_schedule_update_n_return_rftx; |
| IDC_CTRL_SCHEDULE_EVENT_LTE_NR_T r_idc_ctrl_schedule_event_lte_nr; |
| IDC_RAT_T r_idc_ctrl_rat_status; |
| IDC_ILM_T r_idc_ctrl_ilm_mode; |
| IDC_GPS_B13_B14_T r_idc_ctrl_gps_b13_b14_mode; |
| } DCL_CTRL_DATA_T; |
| #else /* __BUILD_DOM__ */ |
| #define IDC_CTRLS \ |
| IDC_CTRL_DCB_CONFIG_T r_idc_ctrl_dcb_config; \ |
| IDC_CTRL_BAUDRATE_T r_idc_ctrl_baudrate; \ |
| IDC_CTRL_SET_FIFO_TRIGGER_T r_idc_ctrl_set_fifo_trigger; \ |
| IDC_CTRL_PM_CONFIG_T r_idc_ctrl_pm_config; \ |
| IDC_CTRL_SCHEDULE_EVENT_T r_idc_ctrl_schedule_event; \ |
| IDC_CTRL_GPS_SINGLE_BLANK_EVENT_T r_idc_ctrl_gps_single_blank_event; \ |
| IDC_CTRL_GPS_L1_L5_BLANK_EVENT_T r_idc_ctrl_gps_l1_l5_blank_event; \ |
| IDC_CTRL_SCHEDULE_UPDATE_T r_idc_ctrl_schedule_start; \ |
| IDC_CTRL_STOP_EVENT_T r_idc_ctrl_stop_event; \ |
| IDC_CTRL_PURGE_T r_idc_ctrl_purge; \ |
| IDC_CTRL_GET_SCHEDULE_STATUS_T r_idc_ctrl_get_schedule_status; \ |
| IDC_CTRL_CHECK_EVENT_SEND_OUT_T r_idc_ctrl_check_event_send_out; \ |
| IDC_CTRL_PIN_CONFIG_T r_idc_ctrl_pin_config; \ |
| IDC_CTRL_PM_CALLBACK_T r_idc_ctrl_pm_callback; \ |
| IDC_CTRL_NEW_PM_CONFIG_T r_idc_ctrl_new_pm_config; \ |
| IDC_CTRL_RF_PATH_T r_idc_ctrl_rf_path; \ |
| IDC_CTRL_REMAPPING_CONFIG_T r_idc_ctrl_remapping_config; \ |
| IDC_AUTO_TX_CONFIG_T r_idc_ctrl_auto_tx_config; \ |
| IDC_AUTO_TX_EN_T r_idc_ctrl_auto_tx_en; \ |
| IDC_CTRL_SCHEDULE_UPDATE_N_RETRUN_RFTX_T r_idc_ctrl_schedule_update_n_return_rftx; \ |
| IDC_CTRL_SCHEDULE_EVENT_LTE_NR_T r_idc_ctrl_schedule_event_lte_nr; \ |
| IDC_RAT_T r_idc_ctrl_rat_status; \ |
| IDC_ILM_T r_idc_ctrl_ilm_mode; \ |
| IDC_GPS_B13_B14_T r_idc_ctrl_gps_b13_b14_mode; |
| #endif /* __BUILD_DOM__ */ |
| |
| // Support list of IDC driver |
| typedef struct |
| { |
| kal_bool idc; |
| kal_bool gpio; |
| kal_bool uart; |
| } IDC_SUPPORT_T; |
| |
| #endif // #ifndef __DCL_IDC_H_STRUCT__ |
| #endif // #ifdef DCL_DEFINITION_STRUCT |
| |
| #ifdef DCL_DEFINITION_PROTOTYPE |
| #ifndef __DCL_IDC_H_PROTOTYPE__ |
| #define __DCL_IDC_H_PROTOTYPE__ |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_GetSupport |
| * |
| * DESCRIPTION |
| * This function is to get the support list of IDC driver. |
| * |
| * PARAMETERS |
| * support: [IN] IDC_SUPPORT_T *support |
| * 1. idc: Indicate whether or not idc driver is supported |
| * 2. gpio: Indicate whether or not GPIO Co-Exist will be used after idc_init |
| * 3. uart: Indicate whether or not UART will be used after idc_init |
| * |
| * RETURNS |
| * Return the support list |
| * |
| * RETURN VALUES |
| * STATUS_OK |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_GetSupport(IDC_SUPPORT_T *support); |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_Initialize |
| * |
| * DESCRIPTION |
| * This function is to initialize IDC module |
| * |
| * RETURNS |
| * Return the status of DclIDC_Initialize |
| * |
| * RETURN VALUES |
| * STATUS_OK: Initialize Finished |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_Initialize(IDC_INIT_TYPE_T type); |
| |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_Open |
| * |
| * DESCRIPTION |
| * This function is to open the IDC module and return a handle |
| * |
| * PARAMETERS |
| * dev: [IN] Only valid for DCL_IDC |
| * flags: [IN] No sepcial flags is needed. Please use FLAGS_NONE |
| * |
| * RETURNS |
| * Return DCL_HANDLE of IDC |
| * |
| * RETURN VALUES |
| * DCL_HANDLE_INVALID : Open failed |
| * Other value : A valid handle |
| * |
| *************************************************************************/ |
| extern DCL_HANDLE DclIDC_Open(DCL_DEV dev, DCL_FLAGS flags); |
| |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_ReadData |
| * |
| * DESCRIPTION |
| * This function is not supported for the IDC module now. |
| * |
| * PARAMETERS |
| * N/A |
| * |
| * RETURNS |
| * STATUS_UNSUPPORTED |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_ReadData(DCL_HANDLE handle, DCL_BUFF *buff, DCL_BUFF_LEN *buf_len, DCL_OPTIONS options); |
| |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_WriteData |
| * |
| * DESCRIPTION |
| * This function is not supported for the IDC module now. |
| * |
| * PARAMETERS |
| * N/A |
| * |
| * RETURNS |
| * STATUS_UNSUPPORTED |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_WriteData(DCL_HANDLE handle, DCL_BUFF *buff, DCL_BUFF_LEN *buf_len, DCL_OPTIONS options); |
| |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_Configure |
| * |
| * DESCRIPTION |
| * This function is not supported for the IDC module now. |
| * |
| * PARAMETERS |
| * N/A |
| * |
| * RETURNS |
| * STATUS_UNSUPPORTED |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_Configure(DCL_HANDLE handle, DCL_CONFIGURE_T *configure); |
| |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_RegisterCallback |
| * |
| * DESCRIPTION |
| * This function is not supported for the IDC module now. |
| * |
| * PARAMETERS |
| * N/A |
| * |
| * RETURNS |
| * STATUS_UNSUPPORTED |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_RegisterCallback(DCL_HANDLE handle, DCL_EVENT event, PFN_DCL_CALLBACK callback); |
| |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_Control |
| * |
| * DESCRIPTION |
| * This function is to send command to control the IDC module. |
| * |
| * PARAMETERS |
| * handle: [IN] The handle value returned from DclIDC_Open |
| * cmd: [IN] A control command for IDC module |
| * 1. IDC_CMD_SET_DCB_CONFIG: to config DCB (baudrate, data bits, stop bits, and parity bits) |
| * 2. IDC_CMD_GET_DCB_CONFIG: to get DCB config from driver |
| * 3. IDC_CMD_SET_BAUDRATE: to set baud rate |
| * 4. IDC_CMD_GET_MAX_BAUDRATE: to get max baudrate |
| * 5. IDC_CMD_SET_FIFO_TRIGGER: to set threshold of idc rx fifo |
| * 6. IDC_CMD_SET_PM_CONFIG: to set pattern matching confg (start/finish priority/pattern, pariority/pattern bit enable) |
| * 7. IDC_CMD_GET_PM_CONFIG: to get pattern matching |
| * 8. IDC_CMD_SCHEDULE_EVENT: to schedule events |
| * 9. IDC_CMD_SCHEDULE_UPDATE: to run schedule |
| * 10. IDC_CMD_STOP_EVENT: to stop specific event from specific schedule |
| * 11. IDC_CMD_PURGE: to clean IDC RX FIFO |
| * 12. IDC_CMD_GET_SCHEDULE_STATUS: to get status of schedule (bitmap, busy:1, idle:0) |
| * 13. IDC_CMD_CHECK_EVENT_SEND_OUT: to check all events are sent out from IDC or not |
| * 14. IDC_CMD_SET_PIN_CONFIG: to set pinmux beteen internal and external pins (K2 Only) |
| * 15. IDC_CMD_GET_PIN_CONFIG: to get pinumx config (K2 Only) |
| * |
| * data: [IN] The data of the control command |
| * 1. IDC_CTRL_DCB_CONFIG_T: pointer to an IDC_CTRL_DCB_CONFIG_T structure |
| * 2. IDC_CTRL_BAUDRATE_T: pointer to an IDC_CTRL_BAUDRATE_T structure |
| * 3. IDC_CTRL_SET_FIFO_TRIGGER_T: pointer to an IDC_CTRL_SET_FIFO_TRIGGER_T structure |
| * 4. IDC_CTRL_PM_CONFIG_T: pointer to an IDC_CTRL_PM_CONFIG_T structure |
| * 5. IDC_CTRL_SCHEDULE_EVENT_T: pointer to an IDC_CTRL_SCHEDULE_EVENT_T structure |
| * 6. IDC_CTRL_SCHEDULE_UPDATE_T: pointer to an IDC_CTRL_SCHEDULE_UPDATE_T structure |
| * 7. IDC_CTRL_STOP_EVENT_T: pointer to an IDC_CTRL_STOP_EVENT_T structure |
| * 8. IDC_CTRL_PURGE_T: pointer to an IDC_CTRL_PURGE structure |
| * 9. IDC_CTRL_GET_SCHEDULE_STATUS_T: pointer to an IDC_CTRL_GET_SCHEDULE_STATUS_T structure |
| * 10. IDC_CTRL_CHECK_EVENT_SEND_OUT_T: pointer to an IDC_CTRL_CHECK_EVENT_SEND_OUT_T structure |
| * 11. IDC_CTRL_PIN_CONFIG_T: pointer to an IDC_CTRL_PIN_CONFIG_T structure |
| * |
| * RETURNS |
| * Return the status of DclIDC_Control |
| * |
| * RETURN VALUES |
| * STATUS_OK: Command is executed successfully. |
| * STATUS_FAIL: Command is failed. |
| * STATUS_INVALID_CMD: It's a invalid command. |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_Control(DCL_HANDLE handle, DCL_CTRL_CMD cmd, DCL_CTRL_DATA_T *data); |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_conn_txrx_count |
| * |
| * DESCRIPTION |
| * This function is to start/end counting BT_80211_RX and BT_80211_TX |
| * |
| * PARAMETERS |
| * is_start: [IN] KAL_TRUE: Start counting |
| * KAL_FALSE: End counting |
| * |
| * RETURNS |
| * Return the status of DclIDC_conn_txrx_count |
| * |
| * RETURN VALUES |
| * STATUS_OK |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_conn_txrx_count(kal_bool is_start); |
| |
| /************************************************************************* |
| * FUNCTION |
| * DclIDC_Close |
| * |
| * DESCRIPTION |
| * This function is to close the IDC module. |
| * |
| * PARAMETERS |
| * handle: [IN] The returned handle value of DclIDC_Open |
| * |
| * RETURNS |
| * Return the status of DclIDC_Close |
| * |
| * RETURN VALUES |
| * STATUS_OK |
| * |
| *************************************************************************/ |
| extern DCL_STATUS DclIDC_Close(DCL_HANDLE handle); |
| |
| // MoDIS parser skip end |
| |
| #endif // #ifndef __DCL_IDC_H_PROTOTYPE__ |
| #endif // #ifdef DCL_DEFINITION_PROTOTYPE |