blob: 0219dab3526402ad2e6325029f3cb640767ce7cb [file] [log] [blame]
/*****************************************************************************
* Copyright Statement:
* --------------------
* This software is protected by Copyright and the information contained
* herein is confidential. The software may not be copied and the information
* contained herein may not be used or disclosed except with the written
* permission of MediaTek Inc. (C) 2005
*
* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/
/*****************************************************************************
* Filename:
* ---------
* l4c_med_msg.c
*
* Description:
* ------------
* This file implements the req and cnf handlers interfacing Media task
*
* Author:
* -------
* -------
*****************************************************************************/
/********************************************************************************
* Copyright Statement:
* --------------------
*
* This product has been developed using a protocol stack
* developed by Sasken Communication Technologies Limited.
*
********************************************************************************/
#ifndef L4C_TST_H
#define L4C_TST_H
#include "dcl.h"
#include "kal_public_defs.h" //MSBB change #include "stack_config.h"
#include "kal_general_types.h"
#include "kal_public_defs.h"
#include "l4c_common_enum.h"
#ifdef __L4C_GPRS_UT__
extern void l4c_ut_check_l4c_context_info(kal_uint8 src_id, kal_uint8 cid, l4c_action_enum action);
extern void l4c_ut_request_type_handover_to_initial_request(kal_uint8 index);
extern void l4c_ut_l4c_convert_data_speed_support_enum();
extern void l4c_ut_config_cgdcontrdp_set_mode();
extern void l4c_ut_config_cgdcont_read_mode();
extern void l4c_ut_config_cgact_read_mode();
extern void l4c_ut_config_pdp_addr_read_mode();
extern void l4c_ut_config_psbearer_read_mode();
extern void l4c_ut_config_eps_qos_read_mode();
extern void l4c_ut_config_cgeqreq_read_mode();
extern void l4c_ut_config_cgqreq_read_mode();
extern void l4c_ut_config_msq_read_mode();
extern void l4c_ut_config_cgprco_read_mode();
extern void l4c_ut_check_ipv4v6_table_all_free(void);
extern void l4c_ut_rmmi_convert_l3_cause();
#endif
//extern kal_bool l4c_check_tst_inject_cmd_conflict(kal_char* cmd_string);
extern void tst_inject_string_hdlr(local_para_struct *local_para_ptr, peer_buff_struct *peer_buff_ptr);
extern kal_bool l4c_attach_uart_port_req(kal_uint8 src_id, module_type module_id, UART_PORT port, kal_uint32 baud_rate);
extern kal_bool l4c_detach_uart_port_req(kal_uint8 src_id, module_type module_id, UART_PORT port);
extern void l4c_open_uart_port_cnf_hdlr(local_para_struct *local_para_ptr, peer_buff_struct *peer_buff_ptr);
extern void l4c_close_uart_port_cnf_hdlr(local_para_struct *local_para_ptr, peer_buff_struct *peer_buff_ptr);
extern kal_bool l4c_check_port_free(kal_uint8 port);
extern void l4c_send_open_port_req(kal_uint8 port, kal_uint8 module_id, kal_uint32 baud_rate);
extern void l4c_send_close_port_req(kal_uint8 port, kal_uint8 module_id);
extern kal_bool l4c_tst_change_log_port_req(l4c_source_id_enum src_id,
DCL_DEV l1_port,
DCL_DEV ps_port,
kal_uint8 log_mode);
extern void l4c_change_uart_port_cnf_hdlr(local_para_struct * local_para_ptr, peer_buff_struct * peer_buff_ptr);
extern void l4c_assert_bypass_trace_ind_hdlr(local_para_struct * local_para_ptr, peer_buff_struct * peer_buff_ptr);
#ifndef __MTK_TARGET__
extern void l4c_atci_ut_rmmi_input_string_hdlr(local_para_struct * local_para_ptr, peer_buff_struct * peer_buff_ptr); //RMMI_UT
extern void l4c_atci_ut_rmmi_expanded_at_command_input_string_hdlr(local_para_struct *local_para_ptr, peer_buff_struct *peer_buff_ptr); //__L4C_GPRS_UT__
extern void l4c_inject_sbp_change_ind_hdlr(local_para_struct *local_para_ptr, peer_buff_struct *peer_buff_ptr);
extern void l4c_ut_set_rac_rat_mode_context_ind_hdlr(local_para_struct *local_para_ptr, peer_buff_struct *peer_buff_ptr);
#endif
#endif /* L4C_TST_H */