| #!/usr/bin/perl |
| # |
| # Copyright Statement: |
| # -------------------- |
| # This software is protected by Copyright and the information contained |
| # herein is confidential. The software may not be copied and the information |
| # contained herein may not be used or disclosed except with the written |
| # permission of MediaTek Inc. (C) 2006 |
| # |
| # BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| # THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| # RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| # AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| # EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| # NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| # SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| # SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| # THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| # NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| # SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| # |
| # BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| # LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| # AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| # OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| # MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| # |
| # THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| # WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| # LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| # RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| # THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| # |
| #***************************************************************************** |
| #* |
| #* Filename: |
| #* --------- |
| #* copro_info_gen.pl |
| #* |
| #* Project: |
| #* -------- |
| #* |
| #* |
| #* Description: |
| #* ------------ |
| #* This script is used to parse copro information |
| #* |
| #* |
| #* Author: |
| #* ------- |
| #* Carl Kao (mtk08237) |
| #* |
| #*------------------------------------------------------------------------------ |
| #* Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| #*============================================================================ |
| #****************************************************************************/ |
| #**************************************************************************** |
| # Included Modules |
| #**************************************************************************** |
| use strict; |
| BEGIN { push @INC , './tools/', './tools/MemoryUtility/' } # add additional library path |
| use CommonUtility; |
| use BasicMemInfoQuery; |
| use FileInfoParser; |
| use POSIX qw(floor ceil); |
| |
| #use L1coreInfo; |
| |
| #**************************************************************************** |
| # Constants |
| #**************************************************************************** |
| my $COPRO_INFO_VERNO = " v0.29"; |
| # v0.29 , 2016/08/01, Tero, Copro generation disabled |
| # v0.28 , 2015/06/23, Carl, Refine GetSharedMemorySize. It includes dsp tx/rx section now |
| # v0.27 , 2015/06/22, Carl, Change default l1core ROM, RAM size |
| # v0.26 , 2015/05/11, Carl, Correct output log |
| # v0.25 , 2015/04/15, Carl, Refine setting for (MCU RO, MDHW RW) DNC+NC, (MCU RW, MDHW RW) DNC+NC |
| # v0.24, 2015/04/09, Carl, Align the shared DNC base to 64KB for input section MCU-RO, HW-RW (EMI RMPU) |
| # v0.23 , 2015/03/27, Carl, set default value of L1CORE_DSP_TX_LENGTH, L1CORE_DSP_RX_LENGTH to 0 |
| # v0.22 , 2015/03/19, Carl, add L1CORE_DSP_TX_LENGTH, L1CORE_DSP_RX_LENGTH for dsp sections |
| # v0.21 , 2015/03/11, Carl, Increase default l1core ROM size to 16MB |
| # v0.20 , 2015/03/04, Carl, Increase default l1core RAM size to 48MB |
| # v0.19 , 2015/01/14, Carl, Memory Utility Refinement |
| # v0.18 , 2015/01/06, Carl, lds refinement: 1) auto adjust shared region size, 2) reserve pcore, l1core SWLA space |
| # v0.17 , 2014/12/22, Carl, Support L2SRAM section (in L1CORE) |
| # v0.16 , 2014/10/29, Carl, Increase l1core default size |
| # v0.15 , 2014/10/06, Carl, Reserve sig space for L1CORE_LV |
| # v0.14 , 2014/09/26, Carl, Support GFH + SIG (reserve space for L1CORE_RWZI) |
| # v0.13 , 2014/09/26, Carl, Support GFH + SIG (reserve space for L1CORE_LV) |
| # v0.12 , 2014/09/26, Carl, Support GFH + SIG |
| # v0.11 , 2014/09/11, Carl, Increase pcore ROM size for pcore only load |
| # v0.10 , 2014/09/11, mei, support memory dump |
| # v0.09 , 2014/09/05, Carl, reduce default shared memory size for PCORE ONLY project |
| # v0.08 , 2014/08/20, Carl, refine l1core dump region |
| # v0.07 , 2014/08/19, Carl, add l1core reset vector address |
| # v0.06 , 2014/07/31, Carl, add l1core dump region |
| # v0.05 , 2014/07/14, Carl, update the lasst section in l1ocre |
| # v0.04 , 2014/05/08, Carl, enlarge default size for build |
| # v0.03 , 2014/05/07, Carl, 2-phase linking |
| # v0.02 , 2014/03/31, Carl, Support to generate L1CORE input (reference:TK6280 pcore\tools\copro_info_gen.pl) |
| # v0.01 , 2014/03/03, BM, Initial revision |
| |
| my $debug_flag = "0"; |
| #**************************************************************************** |
| # Input |
| #**************************************************************************** |
| my $FORCE_GEN = $ARGV[0]; |
| my $COPRO_INFO_TEMP = $ARGV[1]; |
| my $COPRO_INFO_OUTPUT = $ARGV[1]; |
| my $themf = $ARGV[2]; |
| my $INFOMAKELOG = $ARGV[3]; |
| my $SINGLE_CORE = $ARGV[4]; |
| |
| |
| print "copro_info_gen input:\n$ARGV[0]\n$ARGV[1]\n$ARGV[2]\n$ARGV[3]\n$ARGV[4]\n\n"; |
| |
| #**************************************************************************** |
| # Global Variables |
| #**************************************************************************** |
| my $g_bFORCE = ($FORCE_GEN eq "TRUE") ? 1 : 0; |
| $g_bFORCE = ($debug_flag eq "1") ? 1 : $g_bFORCE; |
| my %g_COPRO_INFO; |
| my %g_MKFILE; |
| my %g_CmplOpt; |
| my %g_RelInfo; |
| my %g_PathInfo; |
| exit 0; |
| #**************************************************************************** |
| # >>> Main Flow |
| #**************************************************************************** |
| FileInfo::PreProcess($themf, \%g_MKFILE, $INFOMAKELOG, \%g_CmplOpt, \%g_RelInfo,1); |
| SetPathInfo($COPRO_INFO_TEMP, \%g_PathInfo); |
| |
| SetDefaultValue(\%g_COPRO_INFO); |
| |
| map {print "$_ => ".$g_COPRO_INFO{$_}. "(".CommonUtil::Dec2Hex($g_COPRO_INFO{$_}).")"."\n"; } sort keys %g_COPRO_INFO; |
| gen_COPRO_INFO_LOG(\%g_COPRO_INFO, $COPRO_INFO_OUTPUT); |
| |
| exit 0; |
| #**************************************************************************** |
| # Subroutines |
| #**************************************************************************** |
| sub NeedToGen |
| { |
| my ($bFORCE, $MAKE_FILE)=@_; |
| my $bNeed = 0; # no need to generate |
| print "[NeedToGen] FORCE=$bFORCE, SINGLE_CORE=". $SINGLE_CORE ." debug_flag=". $debug_flag ."\n"; |
| if( ($bFORCE and $SINGLE_CORE eq "FALSE" )or (($debug_flag eq "1") ? 1 : 0)) |
| { |
| #die for BasicMemInfo |
| coproinfo_die("$MAKE_FILE doesn't exist!\n") if(!-e $MAKE_FILE); |
| $bNeed = 1; |
| } |
| print $bNeed ? "=> Generate tmp file contents\n" : "=> NO NEED to generate tmp file contents\n"; |
| return $bNeed; |
| } |
| |
| sub SetPathInfo |
| { |
| my ($strInfoPath, $PathInfo_href) = @_; |
| my $strContent = CommonUtil::GetFileContent($strInfoPath); |
| print "Path Info:\n$strContent\n"; |
| CommonUtil::HashStringParser($strContent, $PathInfo_href); |
| } |
| sub GetPath |
| { |
| my ($strKeyword) = @_; #keyword is defined in codegen.mak's copro_info_gen |
| return $g_PathInfo{$strKeyword}; |
| } |
| sub gen_COPRO_INFO_LOG |
| { |
| my ($COPRO_INFO_href, $OUTPUT_PATH) = @_; |
| my $strCOPRO_INFO = CommonUtil::HashStringGenerator($COPRO_INFO_href); |
| CommonUtil::WriteFileContent($OUTPUT_PATH, $strCOPRO_INFO, 0); |
| } |
| |
| |
| ##################### |
| # FIX_ME, copro |
| ##################### |
| sub wait_for_reuse |
| #sub get_COPRO_INFO |
| { |
| coproinfo_die("not suppoet ARM7 !\n"); |
| |
| my ($MAKE_FILE, $IMAGELAYOUT, $MAP_PATH, $SYM_PATH, $COPRO_INFO_href) = @_; |
| print "Set COPRO INFO:\n"; |
| print "--------------------------------------------------------------\n"; |
| # my $nLoadViewSize = BasicMemInfo::CMD_GetLoadViewSize($MAKE_FILE, $IMAGELAYOUT, $MAP_PATH, $SYM_PATH, undef); |
| # $COPRO_INFO_href->{FileInfo::COPRO_LV_SIZE} = $nLoadViewSize; |
| # my $nTotalRamUsage = BasicMemInfo::CMD_GetPhysicalRAMUsage($MAKE_FILE, $IMAGELAYOUT, $MAP_PATH, $SYM_PATH, undef); |
| # $COPRO_INFO_href->{FileInfo::COPRO_TOTAL_USAGE} = $nTotalRamUsage; |
| } |
| |
| sub SetDefaultValue |
| { |
| my ($COPRO_INFO_href) = @_; |
| print "Set Default Value:\n"; |
| print "--------------------------------------------------------------\n"; |
| |
| $COPRO_INFO_href->{FileInfo::PCORE_LV_SIZE} = 0xE00000; # 14MB |
| |
| if ( &FileInfo::find("SINGLE_CORE_ONLY", "PCORE") ) |
| { |
| $COPRO_INFO_href->{FileInfo::PCORE_LV_SIZE} = 0x700000; |
| |
| } |
| else |
| { |
| $COPRO_INFO_href->{FileInfo::PCORE_LV_SIZE} = 0xE00000; # 14MB |
| } |
| |
| $COPRO_INFO_href->{FileInfo::SHARED_REGION_SIZE} = 0x0; # set it to zero for l1core to auto adjust size. watch out if you want to change it to non-zero value |
| |
| } |
| |
| sub coproinfo_die |
| { |
| my ($error_msg, $file, $line_no) = @_; |
| my $pack_name = undef; |
| if(!defined $file or !defined $line_no) |
| { |
| ($pack_name, $file, $line_no) = caller; |
| } |
| &CommonUtil::error_handler($error_msg, $file, $line_no, 'COPRO_INFO_GEN'); |
| } |